K&M - Controlled Depth Reamer Alliant But it is also used

But it is also used for some other cartridges in that same 'family' which are the same case length as the parent case

or any firearm with straight-line access to the chamber

#14040 cutter will interchange with RCBS

Carry two scoped rifles with absolute confidence

K&M - Controlled Depth Reamer Alliant But it is also usedThe K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even